Welding basic terms
Basic Welding Terms
- Arc Voltage – the voltage that runs along the welding arc.
- Base Metal – the metal material that will be welded or cut.
- Bond – the joining of welding metal and base metal.
Cutting Torch – tool used in gas cutting to control the gases that are used for preheating and cutting metal.
- Goggles – safety equipment worn to protect the welder’s eyes from harmful radiation while welding and cutting.
- Helmet – protection equipment worn to protect the welder’s face and neck.
- Liquidus – the lowest temperature where metal becomes liquid
- Melting Point – the temperature that needs to be reached to allow metal to begin to liquefy.
- Melting Range – the range of temperatures between solidus and liquidus.
Solidus – the highest temperature where a metal remains completely solid.
- Tempering – process of reheating hardened steel below the lowest critical temperature and then allowing it to cool to make the steel stronger.
- Weld – a point where metals have been fused together by heating the materials to a suitable temperature. Filler metals or pressure may be used to accomplish the weld.
- Welder Certification – document certifying that the welder has made his welds according to the standards prescribed.
- Welding Torch – tool used for gas welding to control the flow of gases used.
Welding Materials
- Acetone – flammable and unstable liquid that is used to dissolve and stabilize acetylene.
- Acetylene – a highly combustible gas that is made of carbon and hydrogen that is used in gas welding.
- Alloy – a mixture of one or more elements with at least one being a metal.
- Electrode – various materials that are used to conduct the welding current between the electrode holder and the welding arc.
Ferrite – a pure form of iron that exists below the lowest critical temperature.
- Flux – cleaner used to clean metals to be welded, soldered or brazed. It also dissolves rust and releases any trapped gases that may be in the metal.
- Nonferrous – metals that do not contain any iron. Examples of nonferrous metals include aluminum, bronze, copper, lead and titanium.
- Welding Rod – filler metal that comes in a rod or wire form and is used in brazing and gas welding or in arc welding where the electrode does not produce filler metal.
Modifié le: vendredi 27 octobre 2023, 15:56